1. What does JPRO do? JPRO allows diesel technicians to diagnose and repair a wide range of makes, models, and components. It significantly reduces reliance on OEM software by offering industry-leading bi-directional control, which includes features like DPF regeneration, cylinder deactivation, parameter adjustments, and more. For detailed coverage information, please visit the JPRO Professional page.
2. What trucks does jpro scan tool cover? JPRO Professional serves as the diagnostic solution for all makes, models, and components of commercial vehicles. For specific coverage details, please refer to the coverage chart.
3. What else do I need when purchasing JPRO? To use JPRO software, you will need a compatible Windows PC, laptop, or tablet, an RP1210C compatible adapter, and the appropriate cable to connect your device to the vehicle's OBD-II, 9-pin, or 6-pin connector. If you don't have these items, we recommend purchasing a JPRO as part of an adapter or diagnostic service kit.
4. Can JPRO Commercial Vehicle Diagnostics perform bi-directional vehicle tests such as cylinder deactivation testing? Yes, JPRO is equipped with advanced bi-directional testing capabilities for the makes and models most frequently serviced by our customers. For a complete list of included tests, please consult the coverage chart.
5. Can JPRO Commercial Vehicle Diagnostics adjust user-configurable parameters such as vehicle speed and idle shutdown settings? Yes, for certain vehicles, JPRO allows users to adjust parameters like maximum cruising speed, maximum road speed, idle shutdown time, and enable or disable cruise control. Please check the Coverage Table for a list of vehicles currently supported for these parameter changes.
1. Disconnect the Device: - Unplug the ICOM Next from power or your vehicle.
2. Prepare the USB Stick: - Navigate to the directory: `C:\ProgramData\BMW\ISPI\data\TRIC\ICOMNext\ICOM-Image-xx-yy-zz` on your computer. (Note: This directory is hidden.) - Copy the following files from the latest folder version: - `ICOM_Next-rootfs-xxxxxx.tar.gz` - `ICOM_Next-app-yyyyyy.tar.gz` - Do not use the `ICOM_Restore.bin` file. - Ensure both files are placed in the root directory of a USB flash drive formatted with the FAT32 file system.
3. Connect the USB Stick to ICOM Next: - Insert the USB stick into the ICOM Next device.
4. Initiate Firmware Update: - Press and hold the button on the right side of the ICOM Next, next to the OBD-II cable connector socket. - While holding the button, plug the ICOM Next into your vehicle's OBD II socket. - Continue holding the button until the LED turns solid red. - Release the button and then press it three times within 5 seconds to start the firmware update.
5. Wait for the Update to Complete: - The update process may take several minutes. Do not disconnect the ICOM Next during this time. - The emergency firmware update is complete when all LEDs are no longer lit. - Remove the USB stick.
6. Reconfigure the ICOM Next: - After the firmware update, all previous settings will be lost. - Connect the ICOM Next to your network with a LAN cable to reconfigure it. - If you have a `user.settings` file on the USB stick, it will be automatically installed after the firmware update.
Identifying the Correct Reset Button
- Original ICOM Next: - The reset button is behind a small black hole on the device. - Non-OEM ICOM Next: - The reset button location may differ. - The red circle in the diagram indicates the non-OEM reset button. - The blue circle indicates the OEM reset button. - Some original ICOM Next boards may have the reset button in the blue circle location.
By following these steps, you should be able to restore your BMW ICOM Next device and resolve the issue with the LEDs.
عضو شوید
عضویت سریع
آمار مطالب
آمار بازدید
